Tulip sleeves

Nome Tulip sleeves
Stato finito
Contentezza
Iniziato 11/set/2020
Completato 12/set/2020
Progresso 100 %
Riservatezza pubblico
Note This was a real struggle for me. There was no help, no description how to do it.
I didn't understand any of the marks on the pattern so I did it my way :-)
And as there was no more fabric left I just HAD to succeed!
Maybe this helps other struggling sewers:

- First I closed the under arm seam.
- Then I seamed the sleeve. (Afterwards this is not possible anymore!)
- Then sewed the sleeve in, starting at the side seam from the bodice.
Working my way up, stopped at 8 cm's from the shoulder seam.
(Once on the front side, once on the back side.)
- Then I gathered what was left, back and front separately and pinned and baste stitched the double
layers in the armhole. So you need to 'sandwich' three layers.
- I flapped the back side over the front. Watch your step, because I ended up with one backwards and
one frontwards. (Murphy's law striking again of course!)
It is very confusing when working inside out!

Hope this helps if you're also struggling :-)

Commenti degli utenti

  • désirée boutault

    Merci beaucoup pour ces precisions qui vont aider d'autres personnes
    Le resultat est tres joli

  • Mirja Liehunen

    The shirt with sleeves is very beautiful.

  • Yvonne

    Thanks again Catlady :-)
    Next time (and it won't take me half a day to figure it out now haha!) I'll try the pleats, because these sleeves are indeed very nice!

  • Catlady Tannie

    Yvonne you solved it nicely. I also worked with these sleeves and placed 2 pleats in the excess of the fabric in the top layer on top of the sleeve at the shoulders. These are very nice sleeves and have already used them a few times with different fabrics.